Vacuum tray dryer machine
|Terms of Trade:||FOB|
|Min. Order:||1 Bag/Bags|
|Delivery Time:||30 Days|
|Place of Origin:||changzhou,jiangsu|
Model No.: PLG
Su li dry professional production Vacuum tray Dryer MachineContinuous Plate Dryer Working Principle
The wet material is fed continuously to the first drying layer on the top of the dryer. It will be turned and stirred by rakes when the rake arm rotates and drop down to the outer edge of the large drying plate along the exponential helical line. The material will be moved from the small drying plate to its outer edge and drop down to the outer edge of the large drying plate underneath. Both small and large drying plates are arranged alternately so the materials can go through the dryer continuously. The heat medium can be saturated steam, hot water or thermal oil. The heat will be led into hollow drying plates from one end and come out from the other end. The dried materials will drop from the last layer of the drying plate to the bottom of the dryer and then moved by rakes to the discharge outlet. The material moisture will be removed from the exhaust outlet on the top cover. For the vacuum-type plate dryer, the moisture will be sucked out by the vacuum pump on the top cover. The dried materials will be discharged from the bottom layer. The drying capability can be improved if the dryer equipped with supplementary devices such as finned heater, condenser for solvent retrieval, bag dust remover, return and mix mechanism, draft fan, and etc.
Disc Plate Dryer Performance characteristics
(1) Easy control and strong applicability:
The drying process is optimized by adjusting the thickness of the material layer, the spindle speed, the number of cymbals, the type and size of the blister leaf.
◎ Each layer of drying plate can be heated or cooled by entering the heat medium or the cold medium separately. The temperature control of the material is accurate and easy.
◎ The residence time of the material can be precisely adjusted.
◎ The flow direction of the material is single and there is no back mixing phenomenon. The drying is uniform, the quality is stable, and no mixing is required.
(II) Easy operation and easy operation
◎Dryer driving and parking operations are very simple.
◎ After the feed is stopped, the transport of the material scale leaves the material in the dryer quickly.
◎ Through a special large inspection door mirror, the inside of the equipment can be carefully cleaned and observed.
(3) Low energy consumption
◎ The material layer is thin, the spindle speed is low, and the material transfer system requires less power and less power consumption.
◎ Drying with conductive heat, high thermal efficiency, low energy consumption.
(4) The operating environment is good, the solvent can be recovered, and the dust emission meets the requirements.
◎ Normal pressure type: Due to the low air velocity in the equipment and the high and low humidity distribution inside the equipment, it is difficult for dust to float to the top of the equipment, so the top moisture outlet The exhaust gas contains almost no dust.
◎ Closed type: Equipped with a solvent recovery device, it can conveniently recover the organic solvent contained in the carrier gas. The solvent recovery device is simple and the recovery rate is high. For materials that are flammable, explosive, toxic, and easily oxidized, nitrogen can be used as a carrier gas to carry out closed-circuit circulation for safe operation. Especially suitable for drying flammable, explosive and toxic materials.
◎Vacuum type: The disc dryer operates under vacuum, especially suitable for the drying of heat-sensitive materials.
(5) Easy installation and small floor space
◎ The entire dryer is shipped and the entire transport is completed. It is only necessary to lift the dryer in place and the installation and positioning are very easy.
◎ Due to the dry disk layout and vertical installation, even the dry area is large and the floor space is small.
Continual Plate Dryer Technical characteristics
(a) drying plate
◎ design pressure: generally 0.4MPa, up to 1.6MPa.
◎ maximum use pressure: generally ≤ 0.4MPa, up to 1.6MPa.
◎ Heating medium: Steam, hot water, heat transfer oil, hot water heating at 100°C, 100°C to 150°C, saturated steam or superheated steam at ≤0.4MPa, and heat transfer oil at 150°C to 320°C. Heating, >320 °C can be used when electricity, thermal oil, molten salt and other heating methods.
(b) material transfer system
◎ spindle speed: 1 to 10 minutes, electromagnetic or frequency conversion stepless speed regulation.
◎ Arm: There are 2 to 8 arm arms fixed to the main shaft on each drying plate.
◎ leaves: spliced on the arm, can keep in contact with the surface floating, there are many forms.
◎Rolling and Rolling: For the materials that are easy to agglomerate and need to be crushed, adding a roll in place can strengthen the heat transfer and drying process.
(C) The shell has three types of normal pressure, airtight, and vacuum.
◎ Atmospheric pressure type: Cylindrical or octagonal prism type, there are two types of integral and split structure. The heating medium inlet and outlet main ducts may be inside or outside the housing.
◎Closed type: cylindrical shell, can withstand 5Kpa internal pressure, heating medium inlet and outlet main pipeline can be in the shell, but also outside the shell.
◎ Vacuum type: cylindrical shell, design pressure is 0.1Mpa, heating medium inlet and outlet main pipelines are in the shell.
(d) Air heaters
are generally used with large evaporation to enhance drying efficiency.
Dry pyrolysis Combustion cooling Reaction Sublimation
Organic chemical products, inorganic chemical products, medicine, food, feed, fertilizer
Changzhou Su Li drying equipment Co., Ltd.
Changzhou Suli Drying Equipment Co., Ltd. is a modern enterprise specializing in the design and manufacture of dryers, vacuum dryers, belt dryers, coal-fired hot-air ovens, drying, medicine machines, and chemical equipment, and is dedicated to designing and manufacturing production lines. The company is located in Sanhekou, Jiaoxi Town, Changzhou City, Jiangsu Province. The transportation is very convenient. It is 1km away from the crossing of Shanghai-Nanjing Expressway. Over the years, with the cooperation of high-tech engineering personnel and technical personnel, the company has continuously updated its products and continuously improved its quality, and it is well sold throughout the country. The company is based on its solid comprehensive strength, leading professionals and technical equipments of its peers, and relying on high-quality products as its mainstay, and constantly improving its marketing management system to create a high-quality Sugan brand and establish it in the drying industry. Unshakeable position. This is an era full of competition. Suli is persistently striving for excellence, excellent reputation and first-rate quality. Su Li is making unremitting efforts, sincerely paying attention to your needs and serving you wholeheartedly. Su Li struggled hard and raised national ambitions to create a world-renowned brand.
- Company Name: Changzhou Su Li drying equipment Co., Ltd.
- Representative: gao feng
- Product/Service: Mixing Dryer , Spray Dryer , Granulation Dryer , Crushing Dryer , Vacuum dryer , Drying machine
- Capital (Million US $): 5，580，000RMB
- Year Established: 2003
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 41% - 50%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 10
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 5,000-10,000 square meters
- Factory Location: Sanhekou, Zhenglu Town, Changzhou City, Jiangsu Province
- Contact Person: Mr. partick
- Tel: 86-0519-88670331
Premium Related Products